Epson BrightLink 450Wi - Manual (Page 25)

Connecting to Computers, USB Devices, and Other Equipment 25
2. You may need to change the Input Signal setting in the
projector’s Signal menu to RGB or Auto (see page 74).
3. You can connect an optional stereo mini-jack audio cable to play
sound through the projector (see page 33) or connect a
microphone (see page 35).
4. You may also be able to use the remote control as a wireless mouse
(see page 64).
When you’ve finished making connections, see page 40 for
instructions on turning on the projector and page 43 for instructions
on displaying and adjusting the image. For instructions on using the
interactive pens, see page 47.
Connecting to the USB Port
You can connect a Windows or Macintosh computer to the
projector’s
TypeB (square) USB port and project your
computer’s display. This feature supports the following operating
systems: 32-bit versions of Windows 7, Windows Vista
® , Windows
XP, Windows 2000 (SP4), or Mac OS ® 10.5.1 or later.
A USB 2.0 connection (recommended) provides better picture quality
and response than USB 1.1.
The first time you connect a computer to the projector’s USB port,
software from the projector is installed on your computer.
1. Follow the instructions beginning on page 40 to turn on the
projector.
2. Make sure the USB Type B setting on the Extended menu is set
to USB Display (see page 77).
3. Turn on your computer.