Epson BrightLink 450Wi - Manual (Page 113)

Maintaining the Projector 113
4. Press in the new air filter until it clicks into place.
Replacing the Lamp
The life span of the projection lamp is about 2500 hours if Power
Consumption in the Settings menu is Normal (default), and 3500
hours if this setting is ECO . See page 117 to check the lamp usage.
It is time to replace the lamp when:
■ The projected image gets darker or starts to deteriorate.
■ The message Replace the lamp appears on the screen and the
Lamp light flashes orange. To maintain projector brightness
and image quality, replace the lamp as soon as possible.
You may also need to replace the lamp if the Lamp light flashes
red. See page 123.
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L57.
note
Turn off this product when
not in use to prolong the life
of the projector.