Epson BrightLink 450Wi - Manual (Page 72)

72 Using the Projector Menus
2. Adjust the desired options as needed:
■ Color Mode
Lets you quickly adjust the color and brightness for various
environments. You can save a different setting for each
source. See page 45 for a description of each color mode.
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
■ Color Saturation
Adjusts the color depth of the image.
■ Tint
Adjusts the balance of green to magenta in the image.
■ Sharpness
Adjusts the sharpness of the image.
■ Color Adjustment
Adjusts the color values. Select Abs. Color Temp . to adjust
the overall value from 5000 °K (red) to 10000 °K (blue).
Select
Red , Green , Blue to adjust red, green, and blue hue
and saturation values. (Not available if sRGB is selected as the
Color Mode setting.)
■ Auto Iris
Automatically adjusts the projected luminance according to
the brightness of the image. (Available only when
Dynamic
or Theater is selected as the Color Mode for the current
input source.)
note
The available settings vary
depending on the input
source selected.
The Brightness setting
changes the opacity of the
projector’s LCD panels. You
can also change the lamp’s
brightness. Select
Power
Consumption in the
Settings menu, then choose
Normal or ECO (the
default setting is Normal ).