Epson BrightLink 450Wi - Manual (Page 43)

Displaying and Adjusting the Image 43
Selecting an Image Source
You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don’t see the image you want, press the Source Search button
on the remote control or the projector until you see the image you
want to project. Or, press one of the Source buttons on the remote
control (
Computer , Video , USB , or LAN ).
If you still can’t see an image or can’t project the same image that is on
your notebook or computer screen, see page 126 for solutions.
Select USB to project from a USB device or LAN to project over a
network. See page 66 for instructions.
Adjusting the Image
Once you see your image, you may need to make certain adjustments:
■ To focus the image, see page 44.
■ To quickly adjust the color, brightness, or contrast, see page 45.
■ To change the image aspect ratio, see page 46.
■ If you need to fine-tune the image and/or sound, see “Using the
Projector Menus” on page 69.
Source Search button
Source
buttons