Epson 740i - Manual (Page 40)

34
34
Problems and Solutions
Here are some basic troubleshooting tips if you have any problems:
■ Setting up your printer or installing software
■ Getting good print quality
For more extensive information, check the online help in your printer software or see
“Troubleshooting” in the electronic EPSON Stylus COLOR 740i Manual. If none of
the suggested solutions solve your problem, see page 39 for help contact information.
Problems Setting Up the Printer or Installing Its
Software
You installed the ink cartridges
and the printer started making
noise . . .
■ The first time you install ink
cartridges, the printer charges its
ink delivery system for a couple
of minutes. Please wait until
charging is finished (the
Ppower
light stops flashing) before you
turn off the printer. If you turn
off the printer while it’s charging,
it begins charging again and uses
more ink than necessary when
you turn it back on. See the Start
Here card for details.
■ Make sure the ink cartridge
clamps are locked down
completely and that no packing
material remains in the printer.
You’re having problems installing
the printer software . . .
■ Carefully follow the instructions
for installing the printer software
on the Start Here card, making
sure your printer is turned on and
the interface cable is securely
connected at both ends.
■ If you still have problems, close
all other applications, including
anti-virus programs and screen
savers. Then try installing the
software again.
740i.book Page 34 Thursday, April 15, 1999 2:11 PM