Removing and installing ink cartridges – Epson 740i User Manual
Page 29
![background image](/manuals/84291/29/background.png)
23
Use these EPSON ink cartridges within 6 months of installing them and before the
expiration date on the package:
Black ink cartridge: S020189
Color ink cartridge: S020191
Caution:
To ensure good results, use genuine EPSON ink cartridges and do
not refill them. Other products may cause damage to your printer
not covered by EPSON’s warranty.
If you need to replace an ink cartridge before the lights flash (because the ink is too
old, for example), follow the instructions on page 26.
Removing and Installing Ink Cartridges
You can replace a cartridge when the
B black or
A color ink out light is either
flashing or on.
If you perform these steps when both ink out lights are off, the printer cleans the print
head, as described in “Cleaning the Print Head” on page 19.
1. Remove the new ink cartridge from its packaging.
2. Remove only the yellow part of the tape seal on top as shown below.
Caution:
You must remove the yellow tape from the top of the cartridge or
you will permanently damage it. Don’t pull off the blue portion or try
to remove the clear seal underneath the cartridge.
black cartridge
color cartridge
740i.book Page 23 Thursday, April 15, 1999 2:11 PM