Epson 740i User Manual
Page 33
27
5. Pull up the ink cartridge clamp. The cartridge rises up from its holder.
Caution:
Don’t open the clamp or remove a
cartridge except to replace it with
a new one. Once you remove a
cartridge, you can’t reuse it, even
if it contains ink.
6. Lift the cartridge out of the printer and
dispose of it carefully.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with
water.
7. Lower the new ink cartridge into its holder
with the label facing up and toward the
back of the printer.
8. Press down the ink cartridge clamp
until it locks in place.
9. If you need to replace the other ink
cartridge, repeat steps 5 through 8 before
going on to step 10.
10. Press the
E load/eject button and close the printer cover.
The printer moves the print head and begins charging the ink delivery system.
The
Ppower light flashes and the printer makes various sounds. Charging takes a
couple of minutes. When it’s finished, the
Ppower light stops flashing and stays
on.
Caution:
Never turn off the printer while the
Ppower light is flashing, unless
the printer hasn’t moved or made noise for more than 5 minutes.
740i.book Page 27 Thursday, April 15, 1999 2:11 PM