Subaru Robin EX30 - Manual (Page 41)

- 38 -
(23) EXHAUST PIPE and DUCT(CASE)
Mount the Exhaust pipe and the gasket on the
cylinder head.
EXHAUST PIPE SIDE
(RIGHT SIDE)
GASKET
(Attention to the wrong side and right side)
CYLINDER SIDE
(WRONG SIDE)
Take utmost care not to cut your
hand with the muffler gasket
M8 fl ange bolt : 3 pcs.
Tightening torque
18.0 - 22.0 N ● m
(180 - 220 kgf
●
cm)
(13.0 - 15.9 ft
●
lb.)
M8 NUT : 2 pcs.
M6 x 12 BOLT : 3 pcs.
DUCT (CASE)
EXHAUST PIPE
M8 NUT : 2 pcs.
GASKET
(MUFFLER)
(It has two faces)
A
A
GASKET
EXHAUST
(24) BLOWER HOUSING AND RECOIL STARTER
(a) Align the cord of ignition coil with the cut-out with that of the blower housing to mount the blower housing
on the crankcase.
M6×14 mm bolt : 4 pcs.
(b) Mount the recoil starter on the blower housing.
M6×14 mm bolt & washer : 4 pcs.
M6 x 14 BOLT : 4 pcs.
RECOIL STARTER
BLOWER HOUSING
SPONGE 4
M6 x 14 BOLT & WASHER : 4 pcs.