3 disassembly procedure – Subaru Robin EX30 User Manual

Page 15

- 12 -

5-3 DISASSEMBLY PROCEDURE

Step

Parts to remove

Remarks and procedures

Fasteners

Drain the engine oil

(1) Remove a drain plug (M14 x 12mm)

located on both sides of the case.
Take care not to lose the gaskets.

(2) To discharge oil quickly, remove the oil guage.

14 mm spanner

Drain the fuel

(1) Drain fuel from the carburetor drain.

(See Figure STEP2-A)

(2) Disconnect the fuel pipe from the carburetor.

(See Figure STEP2-B)

OIL GAUGE

GASKET

DRAIN PLUG

STEP 1

STEP 2

STEP2-A

STEP2-B