Subaru Robin EX30 - Manual (Page 25)

- 22 -
Step Parts to remove Remarks and procedures Fasteners
23 Tensioner, Camshaft (1) Remove the tensioner. (See Figure STEP23-A)
Do not lose the pin (tensioner).
(2) Remove the retaining bolt of pin (camshaft) from
the cylinder head. (See Figure STEP23-B)
(3) Remove the pin (camshaft), taking care not to
scratch the O-ring.
(4) Remove the chain from the camshaft sprocket and
then take out the camshaft. (See Figure STEP23-C)
(5) Remove the chain from the crankshaft.
M10 box spanner or spanner
M6 × 12mm : 1 pc.
PIN (CAMSHAFT)
STEP 23
TENSIONER
SPRING
(TENSIONER)
CHAIN
PIN (TENSIONER)
M6 x 12 BOLT : 1 pc.
Bolt used to prevent the
pin (camshaft) from coming out
CAMSHAFT
CHAIN
STEP 23
PIN (TENSIONER)
CAMSHAFT
CHAIN
M6 x 12 BOLT : 1 pc.
Bolt used to prevent the
pin (camshaft) from coming out
PIN (CAMSHAFT)
STEP23-C
STEP23-B STEP23-A