Subaru Robin EX30 - Manual (Page 28)

- 25 -
Step Parts to remove Remarks and procedures Fasteners
28 Crankshaft (1) Remove the woodruff key (for the fl ywheel
magneto).
(2) Remove the crankshaft from the crankcase
by tapping its magneto side end with a plastic
hammer, taking care not to damage the oil seal.
(See Figure STEP28-A)
Plastic hammer
29 Oil sensor (option) (1) Remove the clamp. (See Figure Step29-A)
(2) Remove the oil sensor from the crankcase. M6 × 12mm : 1 pc.
M6 × 16mm : 2 pcs.
CRANKCASE
WOODRUFF KEY
CRANKSHAFT
M6 x 16
BOLT : 2 pcs.
OIL
SENSOR
STEP 28
STEP 29
SHIELD PLATE
(For charge coil only)
M6 x 10 TAPPING
BOLT : 1 pc.
WIRE CLAMP
OIL SENSOR
WIRE
CLAMP
STEP28-A STEP29-A