Subaru Robin EX30 User Manual
Page 35
- 32 -
(12) MAIN BEARING COVER
Apply oil to the bearing and the oil seal lip when mounting the main bearing cover. Also apply sealant (Three
Bond "1215" to the surface of the crankcase. To avoid damaging the oil seal lip, wrap the crankshaft key-way
portion with polyvinyl tape before mounting the main bearing cover.
NOTE: Be careful that the lever portion of governor shaft does not face the main bearing cover.
Tightening torque
17.0 - 18.0 N
●
m
(170 - 180 kgf
●
cm)
(12.3 - 13.0 ft
●
lb.)
MAIN BEARING COVER
M8 x 35 BOLT : 7 pcs.
PIPE KNOCK