Connection example, Connection example -8 – TA Triumph-Adler P-C2660i MFP User Manual
Page 44
2-8
Preparation before Use > Determining the Connection Method and Preparing Cables
Determining the Connection Method and
Preparing Cables
Check the method to connect the equipment to a PC or network, and prepare the necessary cables for your
environment.
Connection Example
Determine the method to connect the equipment to a PC or network by referring to the illustration below.
Connecting a scanner to your PC network with a network cable (1000BASE-T, 100BASE-TX or 10BASE-T)
Administrator’s PC
Embedded Web Server
RX
Network settings, Scanner
default settings, User and
destination registration
Printing
Network FAX
FAX
MFP
USB
Network
Network
FAX
Network
Network
Network
Network/USB
Network/USB
Send E-mail
Sends the image data of scanned
originals to the desired recipient as
a file attached to an E-mail
message.
Send SMB
Saves the scanned image as a data
file on your PC.
Send FTP
Sends the scanned image as a
data file on the FTP.
TWAIN Scanning
WIA Scanning
TWAIN and WIA are standardized
interface for communication
between software applications and
image acquisition devices.
*
Only on products with the fax function installed.