TA Triumph-Adler P-C2660i MFP - Manual (Page 278)

9-22
Setup, Registration, and User Management > System Menu
WSD Scan
WSD Print
Enhanced WSD
Enhanced WSD (SSL)
IPSec
Secure Protocol
Item Description
WSD Scan Select whether or not to use WSD Scan.*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
WSD Print Select whether or not to use WSD Print.*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
Enhanced WSD Select whether to use Enhanced WSD.*
Selecting [Off] will disable the functionality of WIA and TWAIN drivers. If you want to disable
NETWORK PRINT MONITOR functionality, Enhanced WSD, Enhanced WSD (SSL), SNMP
and SNMPv3 (refer to Protocol Detail on page 9-21) must be set to [Off].
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
Enhanced WSD (SSL) Select whether to use Enhanced WSD (SSL).*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
IPSec Make this setting when you use IPSec.*
Value : Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.*
Value : Off, On
IPP Security Select the IPP security level.*
Value : IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level.*
Value : HTTP/HTTPS, HTTPS Only