TA Triumph-Adler P-C2660i MFP - Manual (Page 283)

9-27
Setup, Registration, and User Management > System Menu
Date/Timer/Energy Saver
Configures settings related to the date and time.
Item Description
Date/Time Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value : Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59),
Second (00 to 59)
Date Format Select the display format of year, month, and date. The year is displayed in Western notation.
Value : Month/Day/Year, Day/Month/Year, Year/Month/Day
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list.
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value : Off, On
NOTE: The time allowed to elapse before the panel is reset is set with the Panel Reset
Timer.
Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value : 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Panel Reset], the time display does not appear.
Low Power Timer Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 60 minutes (1minute increments)
Except for Europe: 1 to 240 minutes (1minute increments)
NOTE: Refer to Low Power Mode on page 2-27.
Sleep Rules (models for
Europe) Select whether to use the Sleep mode for the following functions individually:
• Network
• Card Reader*1
• FAX*2
• Application
Value : Off, On
Sleep Level (models except for
Europe) Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.
Value : Quick Recovery, Energy Saver
NOTE: This function will not be displayed when the optional Network Interface Kit is
installed.
Energy Saver Select whether to use the Energy Saver mode for the following functions individually:
• Network
• Card Reader*1
• FAX*2
• Application
Value : Off, On
Sleep Timer Set amount of time before entering Sleep.
Value : 1 to 240 minutes (1 minute increments)
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses. For details, refer to Responding to Error Messages on page 10-13.
Value : Off, On