TA Triumph-Adler P-3525 MFP - Manual (Page 85)

4
FAX Operation (Advanced)
4-31
Program Dial
You can register transmission requirements such as the other party to which you send originals and transmission time
as a program. After registration, you can recall transmission requirements only by pressing the program number. Also,
you can assign names to programs to make recalling programs easier and more convenient.
NOTE: The copy function can be also registered to the program. Up to 4 programs including copying and sending
functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
1 With transmission requirements to be registered are set,
press the Program key and hold it (2 seconds). The
program is registered to the key. When you press a
number where a program is already registered, proceed
to the next step.
2 Press the  or  key to select [Overwrite].
3 Press the OK key.
4 Press [Yes] (the Left Select key). The program is
registered, overwriting the previous one.
Deleting Registration Contents
1 Press the Program key where a program you want to
delete is registered, and hold it (2 seconds).
2 Press the  or  key to select [Delete].
3 Press the OK key.
4 Press [Yes] (the Left Select key). The program is
deleted.
Using Program Dial
1 Press the Program key.
2 Place the originals.
NOTE: You can also use the program you have called up to
change transmission requirements such as changing the
other party.
3 Press the Start key. Transmission begins.