TA Triumph-Adler P-3525 MFP - Manual (Page 123)

Setup and Registration
6-11
6
TX Start Speed
When communication conditions are bad, the fax may not be transmitted correctly. In that case, set a lower TX Start
Speed.
Normally this should be used with the default setting.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Transmission].
5 Press the OK key.
6 Press the  or  key to select [TX Start Speed].
7 Press the OK key.
8 Press the  or  key to select [9600bps], [14400bps] or
[33600bps].
9 Press the OK key.