TA Triumph-Adler P-3525 MFP - Manual (Page 62)

FAX Operation (Advanced)
4-8
Manual Send
This method allows you to send originals by pressing the Start key after confirming that the telephone line has
connected to the receiving system. Connecting a telephone set (commercially available product) to this machine
enables you to talk with the person at the receiving system before sending originals.
Using after Confirming the Connection to the Receiving System
You can send originals after confirming that the telephone line has connected to the receiving system.
1 Press the FAX key.
2 Set the originals.
3 Press the On Hook key.
4 Use the numeric keys to enter the number of the
receiving system.
NOTE: To cancel the operation, press the On Hook key or
Reset key.
5 When you hear the fax tone, the telephone line has
connected to the receiving system. Press the Start key.
Transmission begins.
Using a Telephone to Send
When you want to talk to the person at the receiving system or the receiving system needs to switch to fax, use this
method to send originals.
1 Set the originals.
2 Lift the handset, and dial the number of the receiving
system.
3 Check if the telephone line has connected to the fax of
the receiving system.
When you hear the fax tone
The receiving system is on fax.
1 Press the FAX key.
2 Press the On Hook key.
3 Press the Start key. Transmission begins.
When you hear a voice from the receiving system
The telephone line has connected to the telephone of the
receiving system. When the conversation is over, follow
steps 1 to 3 above.
4 When sending starts (when the Processing indicator on
the operation panel starts blinking), return the handset to
its original position.