TA Triumph-Adler P-3525 MFP - Manual (Page 175)

Appendix-11
Error Code List
When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and
Activity Report.
NOTE: If an error occurs during V34 communication, the U in the error codes is replaced by an E.
Error Code Possible Cause/Action
Busy Failed to establish connection with the recipient
despite auto redialing the preset number of times.
Send again.
CANCELED Transmission was canceled due to an action to
cancel transmission.
Reception was canceled due to an action to
cancel reception.
U00300 Paper depletion occurred at the recipient
machine. Check with the recipient.
U00420 - U00462 Reception was canceled because of mismatching
of communication features with the sender
machine although the line connection was
established.
U00600 - U00690 Communication was stopped due to the machine
failure. Send or receive again.
U00700 Communication was stopped due to failure on the
part of the sender or recipient machine.
U00800 - U00810 Page(s) not sent correctly. Send again.
U00900 - U00910 Page(s) not received correctly. Ask the sender to
resend.
U01000 - U01092 Communication error occurred during
transmission. Send again.
U01100 - U01199 Communication error occurred during reception.
Ask the sender to resend.
U01400 Failed to establish communication with the sender
or recipient machine because dialing registered
for a push line system was used in a pulse line
system.
U01500 Communication error occurred during high-speed
transmission. Send again.
U01600 Communication error occurred during reception of
high-speed transmission. Ask the sender to
reduce the transmission speed and send again.
U01700 - U01720 Communication error occurred during high-speed
transmission. Send again.