TA Triumph-Adler P-3525 MFP - Manual (Page 40)

FAX Operation (Basic)
3-12
Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than waiting
for the specified time, use the procedure below.
1 Press the Status/Job Cancel key.
2 Press the  or  key to select [Scheduled Job].
3 Press the OK key.
4 Press the  or  key to select the job you want to
cancel. Or, select the job you want to send immediately.
5 Press [Menu] (the Right Select key).
6 Press the  or  key to select [Cancel Job]. Or, select
[Start Now] to send the job immediately.
7 Press the OK key.
8 Press [Yes] (the Left Select key). Communication is
canceled. Or, communication starts if sending the job
immediately.
Cancelling Direct Transmission
During direct transmission, to cancel communication during transmission, press the Stop key on the operation panel.
The originals that have been scanned are ejected, and the screen returns to the default screen for sending. When
originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the following
procedure.
1 Press the Status/Job Cancel key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
Scheduled Job: a b
0011 Broadcast
0017 0324256345
*********************
[ Cancel ] [ Menu ]
0018 0756545865