TA Triumph-Adler P-3525 MFP - Manual (Page 124)

Setup and Registration
6-12
Receiving Mode
The following five receiving modes are available.
• FAX Automatic Reception [Auto (Normal)]
• FAX/TEL Auto Switch Reception [Auto (FAX/TEL)] (Refer to page 6-4.)
• FAX/Answering Machine Auto Switch Reception [Auto (TAD)] (Refer to page 6-4.)
• DRD Reception [Auto (DRD)] (Refer to page 6-16.)
• Manual Reception [Manual] (Refer to page 4-9.)
Select the mode appropriate for the way the machine is used.
NOTE: DRD reception mode is available for some countries.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Reception].
5 Press the OK key.
6 Press the  or  key to select [RX Settings].
7 Press the OK key.
8 Press the  or  key to select the desired receiving
mode.
9 Press the OK key. Proceed to the next step if you
selected [Auto(DRD)] in step 11.
10 Press the  or  key to select the DRD Pattern.
11 Press the OK key.
Pattern Description
Pattern 1 Normal Ring
Pattern 2 Double Ring
Pattern 3 Short-Short-Long
Pattern 4 Short-Long-Short