TA Triumph-Adler P-3525 MFP - Manual (Page 32)

FAX Operation (Basic)
3-4
NOTE: Up to 64 digits can be entered as the fax
number of the receiving system.
Spaces will be automatically inserted if you use  at the
end of the row to advance the cursor before entering
more characters.
Use  or  to move the cursor.
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete all entered digits and return to the default screen,
press the Reset key.
Address Recall/Pause
Pressing this key adds about three seconds of waiting
time during dialing. For example, when dialing the
receiving system on an external line, you can use this
method to insert a pause before resuming dialing after
you dial a specific number.
Make detailed settings for sending as necessary. Press
[Detail] (the Right Select key) to display the FAX Detail
menu. Press the  or  key to select [Sub Address],
[Encrypted TX], [TX Start Speed] or [ECM] and change
settings, and then press the OK key.
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine starts
dialing to the receiving system.
FAX No. Entry: A b
0123456789*
[ Chain ] [ Detail ]
Key Description
Sub Address To communicate using the sub address, change this
setting. For details, refer to Sub Address
Communication on page 4-24.
Encrypted TX To send faxes using encryption, change this setting.
For details, refer to Encryption on page 6-28.
TX Start Speed To change the transmission start speed, change this
setting. Select the speed from 33,600 bps, 14,400 bps,
and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of noise on
the telephone line during transmission. To change the
ECM communication setting, change this setting.