TA Triumph-Adler P-3525 MFP - Manual (Page 140)

Setup and Registration
6-28
Encryption
This method allows you to communicate with originals encrypted by the sending system. Therefore, even when a third
party tries to view the originals in the middle of communication by some means, the third party is prevented from
knowing the actual contents of the originals. The originals received are reverted to the originals as they were before
transmission (decrypted) by the receiving system, and printed. This is an extremely effective communication method
for sending confidential documents that are not to be opened by a third party.
IMPORTANT: In order to use encryption communication, the fax of the other party needs to be an our-brand system
with the same type of encryption functions.
In encryption communication, in order to encrypt and decrypt originals, the sending and receiving systems must use
the same 16-digit encryption key. When the encryption key differs between the sending system and the receiving
system, the encryption cannot be conducted. Therefore, the sending system and the receiving system need to have
the same encryption key and 2-digit key No. registered in advance.
Description of settings at sending and receiving systems
NOTE: Set the same characters for the numbers indicated by the same letter in parentheses. For example, the
same characters should be used as the encryption key (C) in both the sending and receiving systems.
Scan originals Output originals
Encrypt Decrypt
Encryption
Sending system Receiving system
Settings
Sending
system
Receiving
system
Reference
page
Encryption Key No. (A) 2 digits (B) 2 digits 6-29
Encryption Key (C) 16 digits (C) 16 digits 6-29
Key No. of Address Book
(or when the number is
directly dialed) (A) 2 digits 6-29
Receiving system
encryption box number
†
(D) 4 digits 6-31
Encryption Box No. † (D) 4 digits -
Key No. in reception
setting (B) 2 digits 6-32
†. When the machine receives originals, the Encryption Box is not used.