TA Triumph-Adler P-3525 MFP - Manual (Page 61)

4
FAX Operation (Advanced)
4-7
Chain Dial
Chain dial is a function that allows you to dial by linking fax numbers of the receiving systems with a chain number
created with a number common to several destinations. By setting a toll free number and an area code to a chain
number, you do not need to enter such numbers for each transmission.
NOTE: You can use the chain number at the head of the fax number of the receiving system.
As an example, when using ‘212’ as the chain number
1 Press the FAX key.
2 Place the originals.
3 Enter ’212’ using the numeric keys.
4 Press [Chain] (the Left Select key).
5 Enter the fax number to connect to the chain number.
Use the numeric keys to enter a fax number
1 ’212’ is already entered, and then enter the fax
number.
2 After entering all the destinations, press the OK key.
Select fax number from the Address Book
1 Press the Address Book key.
2 Press the  or  key to select [Address Book] or
[Ext Address Book].
NOTE: If an expansion address book is not registered, the
address book selection screen will not appear.
3 Press the OK key.
4 Press the  or  key to select the desired
destination.
5 Press the OK key. ’212’ is automatically added to
the destination.
Select fax number from One-touch key
Select the destination from One-touch keys. The chain
number ‘212’ is automatically added to the destinations.
6 Press the Start key. Transmission begins.
Fax No. Entry: A b
212*
[ Chain ] [ Detail ]