TA Triumph-Adler P-3525 MFP - Manual (Page 126)

Setup and Registration
6-14
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
Supported paper types: All Media Type, Plain, Rough, Vellum, Labels, Recycled, Bond, Cardstock, Color, Envelope,
Thick, High Quality, Custom 1 to 8
NOTE: Refer to the machine’s Operation Guide for details on Custom Paper 1 to 8.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Reception].
5 Press the OK key.
6 Press the  or  key to select [FAX Media Type].
7 Press the OK key.
8 Press the  or  key to select the desired paper type. If
you do not specify any paper type, select [All Media
Type].
9 Press the OK key.
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [Common Settings].
3 Press the OK key.
4 Press the  or  key to select [Orig./Paper Set.].
5 Press the OK key.
6 Press the  or  key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
NOTE: [Cassette 2] and [Cassette 3] are shown when the
optional paper feeder is installed.
7 Press the OK key.
8 Press the  or  key to select [Cassette 1 Size],
[Cassette 2 Size] or [Cassette 3 Size].
FAX Media Type: a b
*********************
2 Plain
3 Rough 1 *All Media Type