TA Triumph-Adler P-3525 MFP - Manual (Page 105)

5
Checking Transmission Results and Registration Status
5-5
Printing Administrative Reports
You can print various administrative reports to check the results of fax transmission or the status of the functional
setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print
the transmitted image in the send result report.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [Report].
3 Press the OK key.
4 Press the  or  key to select [Result Rpt Set.].
5 Press the OK key.
6 Press the  or  key to select [Send Result].
7 Press the OK key.
8 Press the  or  key to select [FAX].
9 Press the OK key.
10 Press the  or  key to select [Off] (not to print), [On]
(to print), [Error Only] or [Specify Each Job].
11 Press the OK key. Proceed to the next step if you
selected [On], [Error Only] or [Specify Each Job] in step
10.
12 Press the  or  key to select [Off] (do not print
transmitted image), [Partial Image] (print transmitted
image at full size) or [Full Image] (print all of the
transmitted image) for attachment of the transmitted
image.
FAX: a b
*********************
2 On
3 Error Only 1 *Off