Alarm (buzzer) setting – TA Triumph-Adler CLP 4532 User Manual
Page 86
Using the Operation Panel
2-70
Alarm (Buzzer) Setting
You can set an alarm sound in addition to the message displayed when the paper supply is
exhausted, or when paper jams occur. This setting is useful, for example, when the printer is located
some distance from the user.
The audio alarm is set to On when leaving the factory. If the alarm is set to Off, it will not sound.
1
Press [Menu].
2
Press
or
repeatedly until Others > appears.
3
Press .
4
Press
or
repeatedly until >Buzzer > appears.
5
Press .
6
Press
or
to display the desired alarm. The display changes
as shown below.
Error
Ready
Job End
Key Confirm.
7
Press [OK]. A blinking question mark (?) appears.
8
Select On or Off using
or
.
9
Press [OK].
10
To exit the menu selection, press [Menu].
Ot h er s >
>B u zz e r >
>> E rr o r
O n
>> E rr o r
? O n