TA Triumph-Adler CLP 4532 - Manual (Page 82)

Using the Operation Panel
2-66
Automatic Form Feed Timeout Setting
If the printer receives no data for a certain period, it will time out and release the current interface. It
prints whatever data it has in its buffer and feeds out the page. The default form feed timeout time is
30 seconds.
1 Press [Menu].
2 Press or repeatedly until Others > appears.
3 Press .
4 Press or repeatedly until >Form Feed Time Out appears.
5 To change the timeout time, press [OK]. A blinking cursor (_)
appears.
6 Press or to increase or decrease the value at the blinking cursor and set the desired time. The
timeout time can be between 0 and 495 seconds, in 5-second increments. Use and to move
the cursor right and left.
7 When the desired timeout time is displayed, press [OK].
8 To exit the menu selection, press [Menu].
Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power when the printer is not printing,
processing, or receiving data.
1 Press [Menu].
2 Press or repeatedly until Others > appears.
3 Press .
4 Press or repeatedly until >Sleep Timer > appears.
5 Press and display >>Auto Sleep.
Ot h er s >
>F o rm Fe e d
Ti m e O ut 03 0s e c.
>F o rm Fe e d
Ti m e O ut 03 0 s e c.
Ot h er s >
>S l ee p T i me r >
0 15 m i n.
>> A ut o S l ee p
O n