TA Triumph-Adler CLP 4532 - Manual (Page 77)

Using the Operation Panel
2-61
2 Press or repeatedly until >>Paper Weight appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Press or to display the desired paper thickness. The display changes as shown below. For
details of the default setting for each paper type, refer to Paper Availability on page 1-2.
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
5 When the desired paper thickness is displayed, press [OK] and proceed to Setting the Duplex Path.
Setting the Duplex Path
You can set whether or not to enable duplex printing as follows. The default setting is Enable.
1 Display the custom paper type (refer to Creating Custom Paper Type on page 2-58) and press .
2 Press or repeatedly until >>Duplex path appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select Enable or Disable using or . For details of the default setting for each paper type,
refer to Paper Availability on page 1-2.
5 Press [OK].
6 Press [Menu]. The display returns to Ready.
The custom paper type setting is completed.
Resetting the Custom Paper Type
1 Press [Menu].
2 Press or repeatedly until Paper Handling > appears.
3 Press .
> > Pa p er W e ig h t
No r ma l 2
> > Pa p er W e ig h t
? No r ma l 2
>> D up l ex Pa th
E na b le
>> D up l ex Pa th
? E na b le
Pa p er Ha n dl in g >