Rugged Cams Workhorse DVR 16 Channel - Manual (Page 83)

82
E) Audio setting
Sets the Recording/Live status for the audio input from an external device that is compatible with
the system
On the {Recording Setup}Æ{Data 1~4}Æ{Recording}Æ{Audio} menu, go to the desired
channel using the arrow (STWX) buttons and press the [Select] button.
On the selection box, select the audio channel using the arrow (WX) and [Select] buttons.
(7) Event setup
A) Motion
Used to detect motion
Detection settings include Full, Partial, and OFF. The default setting is OFF.
The full video of a certain channel is displayed as shown below (blocks are used to separate the
areas where motion is detected).
The blue block indicates the areas where motion is detected.
„ Full
Used to detect motion in each zone
Motions are not detected. Motions are detected only in the
selected zones Motions are detected in all zones.