Rugged Cams Workhorse DVR 16 Channel - Manual (Page 81)

80
On the selection box, set the video quality using the arrow and [Select] buttons.
Note ! The size of recording video files according to recording quality
Recording quality The size of recording video files
Lowest
Low
Middle
High
Highest
C) Recording type
Recording Type Description
Automatic
Sets the event recording speed and normal recording speed
separately for automatic recording based on the setting
Continuous Recording done based on the normal frame setting
Motion
Recording done based on the event frame setting in case motion is
detected
Sensor
Recording done based on the event frame setting in case of inputted
signal from an external sensor
Sound
Recording done based on the event frame setting in case sound is
detected
„ Recording conditions
Recording Type Setting
Continuous {Record} Æ {Rate} Æ Normal: 1~30
Motion {Event} Æ {Motion}: Partial or Full
Sensor {Event} Æ {Sensor}: 1~16
Sound {Event} Æ {Sound}: 1~16
{Record}Æ{Rate}Æ Event:
1~30
Automatic Enables both normal and event recording frames at the same time
On the {Recording Setup}Æ{Data 1~4}Æ{Recording}Æ{Mode} menu, go to the desired
channel using the arrow (STWX) buttons and press the [Select] button.
Smaller
Larger