Rugged Cams Workhorse DVR 16 Channel - Manual (Page 13)

12
Spot displays on full screen the channel with an event (motion, sensor, or sound) being detected.
Events are checked every second; if events are detected in multiple channels, the channel with the
last event is displayed.
(3) Audio input/output
There are eight audio input ports, one line output port, and one speaker output port.
(4) Sensor/Relay extension board
Connect the sensor/relay extension board to the DIO port on the rear side of the system using a D-
SUB 25-type extension cable.
A) External sensor connection option
The sensor/relay extension board consists of 16 sensor input ports and 4 relay output ports.
Sensor/Relay extension board
Sensor input port
Up: 1~8
Down: 9~16
Connecting the external sensors
Connect the external sensor cables to S1 ~ S16 and the input port of the sensor/relay
extension board module with the GND symbol.
Each input port may be used regardless of the channel number.
Example - Connecting three external sensors
Connect the external sensor cable to the sensor input ports as shown below:
External Sensor Input Port Ground Port
Sensor1 S1 GND
Sensor1 S3 GND
Sensor1 S6 GND