2. additional setup, 2-1. selecting additional setup, 2-2. ptz setup – Rugged Cams Workhorse DVR 16 Channel User Manual
Page 124
123
5-2. Additional Setup
Use {Additional Setup} to set the PTZ and network features.
After changing the setting on the {Additional Setup} menu, save the setting before exiting
the menu.
[Save] -
Saves the setting
[Cancel]
Exits without saving the setting
[Reset] – Deletes previous settings and
resets the setup
5-2-1. Selecting Additional Setup
On the real-time monitoring screen, select the [Additional Setup] button on the remote control.
The login window is then displayed as shown below:
Select the login account, enter the password using the numeric buttons on the remote control,
and click [OK].
• (The default password of the local administrator is “00000.”)
• To change the ID, go to the ID selection box and select the arrow (ST) buttons.
Once the correct password is inputted, the initial {Additional Setup} menu is displayed as
shown below:
5-2-2. PTZ Setup
Sets the PTZ camera connected to the system
Menu CH
Displays the channel
Menu PTZ
Setting the PTZ causes a camera icon to be displayed.