Rugged Cams Workhorse DVR 16 Channel - Manual (Page 79)

78
VD Stands for Video Disconnection, which indicates the presence of camera
video input on the channel but Record and Live are turned off
VC Stands for Video Covert, which means that recording is done but the video
is hidden only in Live state
(5) Channel ON/OFF
Used to connect the camera to each channel port and to set video input
On the {Recording Setup}Æ {Data 1~4} Æ {Title} menu, go to the desired channel using the
arrow (STWX) buttons and press the [Select] button.
To set all channels at the same time, go to {Title} and press the [Select] button.
On the selection box, select [On] or [Off] and press the [Select] button.
On Connects the inputted video of the camera
Off Disconnects the inputted video of the camera
(6) Record
Sets the resolution, recording quality, recording type, recording frame, and audio recording status
A) Resolution
Sets the resolution of the recorded channel
On the {Recording Setup}Æ{Data 1~4}Æ{Recording}->{Resolution} menu, go to the
desired channel using the arrow (STWX) buttons and press the [Select] button.