Rugged Cams Workhorse DVR 16 Channel - Manual (Page 72)

71
Adjust horizontally or vertically using the arrow (▲▼WX) buttons.
To select a divided screen in horizontal/vertical rotation mode, press the right/left [Tab]
buttons.
(2) Zoom-in/Zoom-out
In horizontal/vertical rotation mode, press the [PTZ] button on the remote control. A toolbar is
then displayed as shown below:
Zoom out (▲) and zoom in (▼) using the arrow (▲▼) buttons.
To select a divided screen in zoom in/out mode, press the right/left [Tab]
buttons.
(3) Focus control
In zoom in/out mode, press the [PTZ] button on the remote control. A toolbar is then displayed
as shown below:
Adjust the camera focus using the arrow (▲▼) buttons.
To select another screen in focus control mode, press the right/left [Tab]
buttons.
(4) Preset
Use Preset to save the horizontal/vertical/extended/focus settings of the PTZ camera.
In horizontal/vertical rotation, zoom, or focus control mode, press the [Select] button.
Select a number using the numeric and arrow (WX) buttons on the OSD menu and press the
[Select] button.
ƒ The preset numbers are between 1 and 8.
The selected number is then changed into blue, and the current screen, saved together with
the selected number.
(5) Using the Preset feature
In horizontal/vertical rotation, zoom, or focus control mode, press any numeric button between
1 and 8 on the remote control.
The selected horizontal/vertical/extended/focus setting of the PTZ camera is then selected.
(6) Using the Tour feature
Use Tour to select the preset settings sequentially.
Use Preset to save the horizontal/vertical/extended/focus settings of the PTZ camera.
For more information on setting the Tour feature, go to {Additional Setup} -> {PTZ Setup} ->
{Tour}.