Rugged Cams Workhorse DVR 16 Channel - Manual (Page 77)

76
(2) Saving the recording setting
Set each menu in {Recording Setup} and save the new setting before exiting the menu.
A) Save
Select the [Save] button using the [Tab]
and arrow (W X) buttons on the remote control
and press the [Select] button.
B) Save as
Save the current setting as multiple data from Data 1 to Data 4.
Select [Save as] using the [Tab]
and arrow (W X) buttons on the remote control and
press the [Select] button.
The user can select multiple data from Data 1 to Data 4. The selected data are then
displayed in green, and others, in blue.
C) Saving on the message window
Closing the window without saving the new setting causes a warning message to appear as
shown below:
Select [Yes] to save the new setting.
Yes Saves the current setting and goes back to the main setup screen
No Goes back to the main setup screen without saving the current setting
Cancel Cancels the current operation and goes back to the previous setting
(3) Naming a channel
Used to name each channel and to set camera input