RIGOL DS1000D User Manual

Page 71

Text mode
Original mode

RIGOL

User’s Guide for DS1000E, DS1000D Series

2-41

NOTE

[1]

: The line number ranges can be set from 1 to 525 under NTSC standard,

and from 1 to 625 under PAL/SECAM.

Figure 2- 49 Table 2- 27 The Video Menu (When the Sync is set as All lines, Odd

field and Even field)

Key points

Sync Pulses: When positive polarity is selected, the trigger always occurs on
negative-going sync pulses. If the video signal has positive-going sync pulses,
use the negative polarity selection.

Figure 2- 50 Figure 2- 51

Video Trigger: Line Synchronization Video Trigger: Field Synchronization

Menu

Settings

Comments

Standard

PAL/SECAM
NTSC

Select Video standard

Sweep

Auto

Normal
Single

Acquire waveform even no trigger
occurred
Acquire waveform when trigger
occurred.
When trigger occurs, acquire one
waveform and then stop

Set Up

To go to set up menu, see table 2-39

This manual is related to the following products:

DS1000E