RIGOL DS1000D User Manual

Page 25

RIGOL

User’s Guide for DS1000E, DS1000D Series

1-15

Vertical offset back to 0 shortcut key
Turn the

knob to change the vertical display position of

channel and press the

knob to set the vertical display position

back to 0 as a shortcut key, this is especially helpful when the trace position is
far out of the screen and want it to get back to the screen center immediately.

2. Change the vertical setup and notice that each change affects the

status bar differently.

 View the status bar which is on the bottom of the screen to understand the

vertical scale.

 Change the vertical scale by turning the

knob and notice the change

in the status bar.

 Press CH1 , CH2 , MATH , REF , LA (only for DS1000D series) to display

the menu, sign, waveform of corresponding channel. Press OFF button to turn
off the channel.

Coarse/Fine Shortcut key
The Coarse/Fine vertical control can be set by simply pressing the vertical

knob.

This manual is related to the following products:

DS1000E