RIGOL DS1000D - Manual (Page 121)

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
2-91
Figure 2- 129 Table 2- 84 The Time Measurements menu (Page 4/4)
Menu Settings Comments
Phas1→2
Measure the phase deviation
between two channels at the rising
edge
Phas1→2
Measure the phase deviation
between two channels at the
falling edge
NOTE: The results of the automatic measurements will be displayed on the bottom
of the screen. Maximum 3 results could be displayed at the same time. When there
is no room, the next new measurement result will make the previous results moving
left out of screen.