RIGOL DS1000D - Manual (Page 152)

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
4-2
proper range by turning the knob or pressing the 50% button. Or set
the Trigger Mode as “AUTO”. Moreover, push AUTO button to display the
waveform on screen.
6. After the Acquisition is set to “Averages” or Display Persistence is set
ON, the waveform refreshes slowly.
It is normal in these settings.
7. The signal is displayed as ladder like waveform.
(1) The time base setting maybe is too low. Turn the horizontal
knob to
increase horizontal resolution to improve the display.
(2) Maybe the display Type is set to “Vectors” set it to “Dots” mode to improve the
display.