RIGOL DS1000D - Manual (Page 118)

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
2-88
To Measure Automatically
The Measure button in the menu area activates the automatic measurement
function. The instruction below shows the powerful measurement function of the
oscilloscopes.
Figure 2- 121
Auto measurement setup button
Menu explanation:
Press the Measure button to display the menu for the settings of the Automatic
Measurements.
The oscilloscopes provide 22 auto measurements: Vpp, Vmax, Vmin, Vtop, Vbase,
Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay1
→
2 , Delay1→2 , Phas1→2 , Phas1→2 ,+Width, -Width, +Duty, -Duty (10
voltage and 12 timing measurements).
Figure 2- 122 Table 2- 77 The Measure menu
Menu Settings Comments
Source
CH1
CH2 Select CH1 or CH2 as source channel
for measurement
Voltage Select to measure voltage parameter
Time Select to measure time parameter
Clear Clear measurement result on screen
Display
All OFF
ON Turn off all measurement results
Turn on al measurement results
Auto measurement setup button