To set up the vertical system, Settings of the channels, To set up the vertical system -2 – RIGOL DS1000D User Manual

Page 32

RIGOL

User’s Guide for DS1000E, DS1000D Series

2-2

To Set up the Vertical System

Settings of the Channels

This series oscilloscopes offer dual channels. Each channel has an operation menu
and it will pop up after pressing CH1 or CH2 button. The settings of all items in the
menu is shown in the table below.

Figure 2- 1 Table 2- 1 The Channel menu (Page 1/2)

Menu

Settings

Comments

Coupling

AC

DC

GND

Blocks the DC component of the
input Signal
Passes both AC and DC
components of the input signal
Disconnects the input signal

BW Limit

ON

OFF

Limits the channel bandwidth to
20MHz to reduce display noise.
Get full bandwidth.

Probe

1X
5X
10X
50X
100X
500X
1000X

Set this to match your probe
attenuation factor to make the
vertical scale readout correct

Digital filter

Setup digital filter (See table 2-4)

1/2

Go to the next menu page (The
followings are the same, no
more explanation)

This manual is related to the following products:

DS1000E