Select a test standard to use for new tests – Retrotec FanTestic Customized Reports User Manual
Page 50
rev-2014-10-27
Page 50 of 61
©Retrotec Inc. 2011-2014
FanTestic will run in demo mode with full functionality for 30 days after you first install. Once the demo
version expires, you will not be able to change the test standard being used, generate the MS Word
reports or export your test data to MS Excel. You will still be able to enter test data and see the results
on-screen, and open tests generated using any of the test standards.
Obtain a license and instructions for activating the software with the license before your demo expires
by contacting
. The license will be valid for the period of time specified for the
license, and with a valid license you will be able to generate the MS Word reports and export your test
data to MS Excel.
If your demo or license has expired you will see a dialog window similar to the following when you start
FanTestic:
Click “OK” to start the limited version.
The main FanTestic menu bar is at the top, to provide access to functions needed pre and post test.
The first time you run FanTestic, you need to make some choices about how you will use FanTestic–
access from the “Settings” menu as described in the next sections.
Select a test standard to use for new tests
FanTestic is based on national and international standards which specify how the Air Leakage Tests are
to be performed to be valid. Choices of test standard are available “Settings” “Change Standard used
for new tests”. The number of Test standards available to be chosen in the list depends on the license
purchased.