Retrotec FanTestic Customized Reports User Manual
Page 41
rev-2014-10-27
Page 41 of 61
©Retrotec Inc. 2011-2014
VentAdditionalNegative
no
All
Vent area above leakage required for
structural integrity
VentAdditionalPositive
no
All
Vent area above leakage required for
structural integrity
VentAreaRequiredNegative
no
All
Total vent area required for structural
integrity.
VentAreaRequiredPositive
no
All
Total vent area required for structural
integrity
VentAreaUnits
N/A
such as sq in
VentAreaUsedNegative
no
All
free vent area during discharge
VentAreaUsedPositive
no
All
free vent area during discharge
VentLeakageMeasuring
N/A all
Total leakage values come from either
“measuring” or “estimating”
VentLeakageMeasuringNegative
If vent negative dataset entered, values
come from either “measuring” or
“estimating
VentLeakageMeasuringPositive
N/A all
If vent positive dataset entered, values
come from either “measuring” or
“estimating
VentMeasuring
no
All
Peak Pressure will be relieved using the
leakage of the {VentMeasuring}
VentTesting
no
All
results were obtained by determining the
Total Leakage Area of the {VentTesting}
VentType
no
All
Damper actuation
Vn-BIAvg
no
All
Venting data, n=direction number bias
initial average
Vn-CEnv-Result
NFPA
Venting Leakage constant, k for direction n
(flow unit per hour per Pa exp n)
Vn-EQLA-Result
NFPA
Leakage area at refP, for direction n