Retrotec FanTestic Customized Reports - Manual (Page 27)

rev-2014-10-27
Page 27 of 61
©Retrotec Inc. 2011-2014
n-StartDate no All start date for data set n
n-StartTime no All start time for data set n
n-StaticPointCount no all number of bias data points to take
n-StaticSecondsPerPoint no All in each bias data point take collect
data for this many seconds
n-TempFinalIn no all final temperature inside for data set n
n-TempFinalOut no All final temperature outside for data set
n
n-TempInitialIn no All initial temperature inside for data set
n
n-TempInitialOut no all initial temperature outside for data
set n
n-TestDirection no All test direction for data set n (in local
language)
n-TestingMethod no ATTMA tsl1 or tsl2 test method
n-TFp No All Total flow, data set n, point p
n-TFPp No All Total fan pressure, data set n, point p,
single fan test only
n-TimePerFlowMeasured no USACE the actual number of seconds per
induced pressure point measurement
achieved in the nth set
n-TimePerStaticMeasured no USACE the actual number of seconds per
static pressure point measurement
achieved in the nth set
n-WindDirection no ASTM wind direction for data set n
n-WindDirection no ATTMA wind direction for data set n
n-WindDirection no CGSB wind direction for data set n
n-WindDirection no USACE wind direction for data set n