Retrotec FanTestic Customized Reports - Manual (Page 39)

rev-2014-10-27
Page 39 of 61
©Retrotec Inc. 2011-2014
n-StaticSecondsPerPoint no ISO in each bias data point take collect data for
this many seconds (or a minimum of this
many readings)
n-TempFinalIn no all final temperature inside for sample n
n-TempFinalOut no All final temperature outside for sample n
n-TempInitialIn no All initial temperature inside for sample n
n-TempInitialOut no all initial temperature outside for sample n
n-TestDirection no All test direction/sample n (in local language)
n-TFp no All total flow for direction/sample n, point p
(only include if more than one equipment
or FPL)
n-TFPp No All Total fan pressure, direction n, point p –
only valid if one fan being used
OperatingTemperature no All
PeakDischargeTime no All Estimated time for agent to discharge
before calculating hold time - seconds
PeakPressureNegative no All Based on agent used and enclosure
conditions
PeakPressurePositive no All
PeakVentType no All Damper actuation
PermeabilityRefPa no ISO Reference pressure for permeability
measurement
PPMaxHumidity no All peak pressure UI max humidity value
PPMinHumidity no All peak pressure UI min humidity value
QuantUnits N/A Quantity units such as lb
RetentionCanCannot TestPasses ? “can”:”cannot”