Precision Digital PD6730X - Manual (Page 68)

PD6730X Vantageview Super Snooper Modbus Scanner Instruction Manual
68
Pulse Output (PUlse)
Pulse outputs may be assigned to: rate (RATE); total (TOTAL); grand total (GrTOTAL);
retransmit (RETRAN); quadrature (QUAD); Modbus PV or math channel (PV); or test (TEST).
Input Pulse Rate Pulse Output (RATE)
A pulse rate based pulse output is a factor of the rate display and count (or divisor). The
rate display is a factor of the input pulses, time base, and the input k-factor. The rate of
output pulses over one time base (seconds, minutes, hours, days) is defined below in
terms of input pulses, the input k-factor, and count parameters.
For example, if the input k-factor value is set to 10, and the count set to 10, one output
pulse is generated for every 100 input pulses.
Total & Grand Total Pulse Output (TOTAL, GrTOTAL)
A total and grand total based pulse output is a factor of the associated total and count (or
divisor). A pulse will be generated for every total accumulation amount equal to the count.