Precision Digital PD6730X - Manual (Page 53)

PD6730X Vantageview Super Snooper Modbus Scanner Instruction Manual
53
Total Units (TOT U)
This menu is used to select the display units for the total.
Total is displayed as a unit of volume with a multiplier. The multiplier prefix will appear before the total unit
(examples: MGAL, kL).
A base unit and a multiplier prefix are selected. If total and units are selected to display, the multiplier
prefix will appear before the total unit (examples: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or 1 million units. The scanner will appropriately calculate
the total for display with the programmed multiplier and units.
A custom unit may be selected (VOL CUST), and no multiplier menu will be required. See Custom Units
Entry (CUST) on page 56.
Press Enter to access the Total Units menu and Up button to scroll through choices. Press Enter to make
a selection and proceed to the next menu. If a unit other than custom unit (VOL CUST) was selected,
select a total unit multiplier. Press the Up button to scroll through multiplier choices, and press Enter to
make a selection and continue programming.
The custom total unit selection (VOL CUST) will require the custom unit to be entered by the user. See
Custom Units Entry (CUST) on page 56. A total conversion factor is available with custom units.
Press the Menu button to exit without saving changes.
The following units may be selected as the base units for total and grand total.
GAL Gallons Gallons
L Liters Liters
IGAL Imperial Gallons Imperial gallons
M3 Meters3 Meters cubed
BBL Barrels Barrels
BUSH Bushels Bushels
cuyD Cubic Yards Cubic yards
cuFt Cubic Feet Cubic feet
cuIn Cubic Inches Cubic inches
LiBBL Liquid Barrels Liquid barrels
BBBL Beer Barrels Beer barrels
HECtL Hectoliters Hectoliters
CUST Custom Volume Enter custom total or
grand total unit
Total Unit Selection Unit Description