MCZ Face - Manual (Page 40)

PELLET STOVES Chapter 5
INSTALLATION AND USE MANUAL page
40
Menu structure Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
1. Press the button on the top right “D” of the display to access
the menu
2. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the SETTINGS menu.
3. Press button "D" corresponding to the word SET.
4. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the PELLET RECIPE menu.
5. Confirm by pressing the button "D" in correspondence to SET.
6. Change the value using lower keys “F” and“C” corresponding
to symbols + and –
7. Confirm by pressing the button "D" in correspondence to key
OK.
The available values are:
- 3 = 30% decrease in pellets at all powers.
- 2 = 20% decrease in pellets at all powers.
- 1 = 10% decrease in pellets at all powers.
0 = no variation
1 = 5% increase in pellets at all powers.
2 = 10% increase in pellets at all powers.
3 = 15% increase in pellets at all powers.
5.4.5. Changing the smoke exhaust fan speed –
Var.% smoke rpm
In the installation proves difficult for smoke discharge (lack of draught
or even pressure in the conduit), it is possible to increase the smoke
and ash exhaust speed. Such modification is also the best way to solve
all potential problems of pellet blockages in the grate and sediments on
the bottom of the grate which are created by bad quality fuel or which
release a lot of ash.
1. Press the button on the top right “D” of the display to access
the menu
2. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the SETTINGS menu.
3. Press button "D" corresponding to the word SET.
4. Using the two lower keys “F and "C" scroll through the various
menus until you reach VAR. SMOKE RPM.
5. Confirm by pressing the button "D" in correspondence to SET.
6. Change the value using lower keys “F” and“C” corresponding
to symbols + and –
7. Confirm by pressing the button "D" in correspondence to key
OK.
The available values range from -30% to +50% with variations of 10
percentage points at the time.