MCZ Face - Manual (Page 23)

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL page
23
Installation and assembly Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.3.2. FACE STOVE
To assemble the sides it is necessary to:
Lift cover “A”
Cut the two ties which hold top “B” to the stove
Remove top “B”.
Take the side “C” (making sure that it enters the part underneath plug
“G”) and secure it to the top sheet of the stove using the two screws
“E and F” provided.
At the rear, the side should be secured to the structure using lower
screw “D”.
Repeat the same operation for both sides. Now raise the cover “A”
and position the cast iron top “B”.
A
B
C
D
E
F
G
Figure 6 – Assembling the sides Face stove